Modular Scroll Air Cooled Chiller (LTWF Series Cooling Capacity 5-140kw)

Modular Scroll Air Cooled Chiller (LTWF Series Cooling Capacity 5-140kw)

Air Cooled Chiller

-Air Cooled Chiller /Air to Water Chiller for Air Conditioning Cooling or Industry

-Scroll Compressors(Copeland, Sanyo, Danfoss etc.) Units

-Semi-hermetic Piston Compressors(Bitzer etc.) Units

-R22, R134a, R407c, R410a refrigerant available;

-Shell and Tube Type Evaporator or Tube in Tube Type Evaporator

-Air Cooled V-Type or U-Type Condenser, Copper Tube and AL Fin;

-Refrigerant Control: Thermal Expansion Valve.

Air Cooled Chiller Features:

1.With scroll, or reciprocating compressor of high quality, high efficient heat exchangers, excellent system design, by excellent process, the chillers is of suffient capacity and efficiency.

2.The chillers will work stably for long time period as they are produced by excllent process, composed of reliable control components and professional control procedure.

3. Units with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

4. 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.

5. External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.

6. Evaporator built with high efficiency tube in tube type heat exchanger, factory insulated with flexible close cell material.

7.Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.

8. Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve high & low pressure switch.

9. Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.

10. Electric panel consist of: compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit).

11. Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.

12. Complete safety protection:

a. High&low pressure protection, pressure safety value protection;

b. Overload protection to the compressor;

c. Power supply protect for phase lack, counter phase, voltage too high and voltage deficient;

d. Water system protection for freezing breaking, water lack etc.

Applicable Industries

-Industrial Reaction Kettle Cooling

-Central Air Conditioning System

-Chemical Industry.

-Plastic Injection Cooling -Pharmaceutical Industry

System Diagram

Model Specifications: LTWF-68   A   S     E(P)

LT-LVTE Company Products Code

W-Scroll Type Compressor     

F-Air Cooled Type Chiller

E-Built in Water Pump and Water Vessel; P-Built in Water Pump without Vessel; Empty-No Pump and Vessel

Model Details of Air Cooled Chiller

1. Design Cooling Condition: Chilled Water In/Out 12°C/7°C;Ambient 35°C

Models: LT03AS-40AD Cooling Capacity: 8KW-120KW

-Hermetic Scroll Compressors

-Tube in Tube Type Heat Exchanger for Evaporator

-V Type Fin Air Cooled Condenser

-Water Pump and Water Tank are an optional to built in the chiller

-Chilled Water Inlet/Outlet Temperature 12°C/7°C,Ambient 35°C

-Mostly Used for Central Air Conditioning Cooling

Two Kinds of Models: Air Cooled Water Chiller/Air to Water Chiller

1. Cooling Condition: Chilled Water In/Out 12°C/7°C;Ambient 35°C

Models: LT03AS-40AD Cooling Capacity: 8KW-120KW

2.Cooling Condition: Chilled Glycol in/out -1/-5°C; ambient 35°C

Models: LT03ASL-40ADL Cooling Capacity: 4.7KW-61.6KW

Specs of LTWF Series Air Cooled Chillers

Products in the Factory

   Every Year Attending Canton and Other Exhibitions